Bluewater 2N1 Switch
2N1 Inrush Switch  ·  IP69K  ·  SS316  ·  US Patent

The only pushbutton
that works like a rocker.

Two independent outputs. One switch body. Up and down actuator motion — backlit, waterproof, and laser-etched to match any helm.

Shop the 2N1 See Features
2-in-1
Outputs, One Body
IP69K
Waterproof Rating
SS316
Stainless Steel Body
50K
Cycle Rated Life
What Makes It Different

The only pushbutton switch with two independent actuator motions — like a rocker, but built like a pushbutton.

  • Press the top actuator for one output, bottom for the other — two separate control inputs from one compact body
  • Replaces two switches with a single 0.89" panel cutout — cleaner helm, less drilling, less wiring
  • IP69K waterproof — the highest rating available — salt spray tested and 20g bump shock approved
  • Stainless steel SS316 body resists corrosion in the harshest saltwater environments
  • Full LED backlighting with blue nightmode glow, plus independent status LEDs on each actuator
  • 9–24VDC compatible — works on any 12V or 24V marine system
2N1 Switch
🔀

Two Outputs, One Cutout

Up motion controls one output, down motion controls the other. The functionality of two switches in a single 0.89" panel hole.

💡

Full LED Backlighting

Blue ambient backlight for nighttime visibility, plus independent status LEDs on each actuator — always know your switch state at a glance.

🌊

IP69K Waterproof

Rated for high-pressure, high-temp washdowns. Salt spray certified to EN ISO 9227-17. Built for offshore use, not just splash-resistant.

🔩

SS316 Stainless Body

Grade 316 stainless stands up to years of saltwater exposure. Corrosion-resistant, UV-stable, and built to match a professional helm aesthetic.

✏️

Custom Laser Etching

Both actuators laser-etched with any icon, label, or logo. OEM-ready for boat manufacturers who want a factory-finished helm.

⚡

High-Current Capable

2 × 10A independent channels, 20A max. Handles real marine loads like winches, thrusters, and lighting without a relay in most applications.

Custom Actuators

Your label.
Your brand.
Your helm.

Laser-etched actuators give every 2N1 install a factory-finished look. Any icon, any text, any logo — top and bottom labeled independently.

  • Double-painted black actuators, laser-etched for sharp contrast
  • Full translucent actuators for illuminated labels
  • Top and bottom actuators labeled independently
  • Any function, icon, or custom branding
  • OEM volume pricing available
⚓ Nav / Anchor
🎣 Outriggers
↕ Trim Tabs
⚙ Custom Label
Laser Etched Actuators
Switch Configurations

Every application covered.

One body, eight behaviors. Pick the part number that matches the job.

9059-7002
Double Momentary ON
Press & hold each button independently. Both N/O.
9059-7004
Double Momentary OFF
Press & hold to cut each output. Both N/C.
9059-7006
Momentary ON/OFF
Top turns off output 2, bottom turns on output 1.
9059-7009
Double Latch ON
Press once to latch on and stay on. Both N/O.
9059-7012
Latch ON / Momentary OFF
Top latches on. Bottom is momentary off.
9059-7013
Latch ON / Interrupt OFF
Top latches both outputs. Bottom interrupts both.
9059-7014
Nav / Anchor
Top activates nav & anchor. Bottom swaps them.
9059-7015
Dimmer PWM
Top dims up 5→100%. Bottom dims down 100→5%.
Specifications

Full spec sheet.

Electrical Rating2 × 10A per channel, 20A max
Voltage9–24VDC
Surge Rating80A (200ms)
Reverse Polarity Protection24VDC
Waterproof RatingIP69K
Body MaterialStainless Steel SS316
IlluminationBlue, Green, Red, Yellow, Purple, White LED
Mechanical Life50,000 cycles
Electrical Life10,000 cycles
Operating Temp-20°C – +55°C
Panel Thickness1–6mm
Mounting HoleØ0.89"
CertificationsSalt Spray EN ISO 9227-17, UL 94 V2, 20g Bump Shock
PatentUS No. 10,476,200 / 10,777,370

Ready to upgrade
your panel?

The only pushbutton that works like a rocker. Waterproof, backlit, and built to your spec.

Shop the 2N1 → Request OEM Pricing